• 2017 HH 150 GTS - trans flluid leak at locator bolt

  • Have a technical problem? Ask here.

    READ THE SECTION RULES BEFORE POSTING FOR HELP
Have a technical problem? Ask here.

READ THE SECTION RULES BEFORE POSTING FOR HELP
Forum rules: Help us to help you, by reading our information in this Forum thoroughly and performing the tests within to pinpoint your issue.
 #13546  by TimmyTheTorch
 Sun May 12, 2019 6:02 pm
I am having a frustrating problem with the FNR transmission. I've had the case apart several times verifying as best I can that everything is assembled correctly but I don't see any issues. Gearboxes have never been my favorite thing to work on.

On the bottom of the trans case the locating bolt, washer, shaft, spring and ball bearing are installed. However, if I tighten the bolt so that there is not even slight tranny fluid seepage past this bolt, I can't change gears at all using the shift lever. However, if I back off this bolt enough so I can shift into F and R, I get a slight leak at the bolt when the buggy is in use. I'm thinking maybe the washer needs to be replaced or, and more likely, I have something slightly off in the gearbox.

The picture shows the bolt I'm talking about.

Capture.JPG

Anyone have any ideas?