• Not new but I need some help

  • New updates to our store, forum, and products are posted here -T@BD
New updates to our store, forum, and products are posted here -T@BD
 #13532  by wisconsinjimmy
 Mon May 06, 2019 11:22 am
My son purchased a KASEA KART has the 150cc engine. The wiring for this kart is well pass salvation really a butcher job, so my son ordered a new harness from who ?? to add insult to injury the harness is for a MC/Scooter as it is real short also it is a four wire switch on and off must be started from handle bar Can some one tell me where the wires go? Stater/pickup is new, coil /plug wire is new, Regulator is new as well as the CDI box, I have one CDI that say's racing and two that are black with one having some writing beginning with a Z.
The red and Black wire has about 70V AC and the blue/white has about 5V the coil is in spec. I sometimes get a very week spark but mostly not. The harness has a 9 pin male plug but I have no matching female also there are two spade terminals that when jumper'd together the engine will crank if not connected nothing
Please help.
Jim