• Finks Next Spiderbox Build

  • Show off your builds and upgrades here!
Show off your builds and upgrades here!
 #12831  by Fink117
 Tue Sep 11, 2018 8:48 pm
Travis @ Buggy Depot wrote:
Mon Sep 10, 2018 11:52 am
Fink117 wrote:
Sun Sep 09, 2018 3:12 pm
Travis how hard is it to bench test a GY6 to make sure it's running ok? These wiring harnesses look confusing AF. If my Hammerhead ever needs to be rewired I may cry.
It's pretty easy once you get into it. Let me know when you're ready and I'll put together some instructions for you.
I can get it to crank but dont have spark. I have like 3 CDI boxes to play with just need guidance on how to make it work.
2018-09-11 16.46.11.jpg
 #12832  by Fink117
 Wed Sep 12, 2018 11:32 am
Need help with the wiring. Is there anyway I can build my own harness to make this thing work?. I've been reading wiring diagrams and nothing I do will make this thing put out spark. Getting frustrated.
 #12866  by Fink117
 Fri Oct 05, 2018 10:42 am
After the engine gets up to temp, it starts to smoke pretty good. Could this be a valve lash problem or do I need to pull the head? Check rings or cylinder scoring?
 #12900  by Fink117
 Wed Oct 10, 2018 7:08 pm
Started out as this bought it for $160
43590287_10160818164930462_7800691856953573376_o.jpg
Finished it today. Still have to paint it in the spring and do some front end upgrades.
2018-10-10 17.04.43 HDR.jpg
2.jpg
`.jpg
Think i need to do some rings because it seems to be burning some oil. Could bad Valve lash also cause oil burning? GY6 is completely new to me for working on I do have 2 extra blocks to pull parts from if i need top end parts.