• BDX Heavy Duty Axle Kits due to arrive in two weeks!

November 2019 Forum Retirement
Due to lack of extra personal time (and too much spam), I'm retiring the forum and setting it to a read-only state. No new registrations or posts will be accepted as of 11/09/19. However, all information will stay up and searchable. If you spend a few minutes searching, you'll find the answers you're looking for. We may re-open the forum next spring.
 #4499  by Travis @ Buggy Depot
 Mon May 05, 2008 6:10 pm
The newest version of the beefy BDX axles are on schedule to arrive here within the next two weeks! After this shipment comes in we will have a continuous supply of these in stock. We will also have the updated axle bearings in stock by the time the axles come in.

Did you know?
- The splined ends of the BDX HD Axle (that mesh with the wheel hubs) have been made 25% fatter! Now 25.3mm thick, previous versions and the stock Yerf GX150 axle were just under 3/4" (18.3mm).

- Also! The threaded axle-ends (that hold the wheel hubs in place) are also much fatter in diameter, again by about 25%. Done to eliminate any chance of stretching in these areas. If you've ever torqued down tight on your stock axle-end nuts only to find the wheel hubs loose again after the next ride, you should know exactly what I'm talking about.