The newest version of the beefy BDX axles are on schedule to arrive here within the next two weeks! After this shipment comes in we will have a continuous supply of these in stock. We will also have the updated axle bearings in stock by the time the axles come in.
Did you know?
- The splined ends of the BDX HD Axle (that mesh with the wheel hubs) have been made 25% fatter! Now 25.3mm thick, previous versions and the stock Yerf GX150 axle were just under 3/4" (18.3mm).
- Also! The threaded axle-ends (that hold the wheel hubs in place) are also much fatter in diameter, again by about 25%. Done to eliminate any chance of stretching in these areas. If you've ever torqued down tight on your stock axle-end nuts only to find the wheel hubs loose again after the next ride, you should know exactly what I'm talking about.
Did you know?
- The splined ends of the BDX HD Axle (that mesh with the wheel hubs) have been made 25% fatter! Now 25.3mm thick, previous versions and the stock Yerf GX150 axle were just under 3/4" (18.3mm).
- Also! The threaded axle-ends (that hold the wheel hubs in place) are also much fatter in diameter, again by about 25%. Done to eliminate any chance of stretching in these areas. If you've ever torqued down tight on your stock axle-end nuts only to find the wheel hubs loose again after the next ride, you should know exactly what I'm talking about.
Travis • Buggy Depot • Enthusiast owned and operated since 2005
