Page 1 of 1

Yerfdog front brake kit questions/steering rack questions

PostPosted:Wed Jun 12, 2019 4:33 am
by Mrmonk7663
Looking into the BDX front brake kit...and the entire BDX front end. Will the kit work with 8” OR 10” wheels? Any particular offset needed?

If I have the steering rack modified what is the tallest/widest tire I can run without having frame contact?

I am planning on a 20x7-10 front and a 22x10x10 rear. 8” is a possibility in rear but I ride in fields and roads so I imagine the stiffer sidewall the 10” would give would be better for my application (please educate me if I’m wrong)

Thanks! I look forward to yalls advice.

Re: Yerfdog front brake kit questions/steering rack questions

PostPosted:Wed Jun 12, 2019 11:46 am
by gokartingisfun
I'm currently running a 20x7-8 on the front of my Yerfdog and a 25x12 - 9 on the rear. The thing is a tank. I'm also running a taller shock on the front and modified my steering rack to increase the turning ability and I'm not having any frame contact.

Re: Yerfdog front brake kit questions/steering rack questions

PostPosted:Wed Jun 12, 2019 8:20 pm
by Mrmonk7663
Sounds big and nice. Thank you. I think I’ll go 20x7x10 on the front. This should assure that I have no frame contact stock or modified rack. Still not sure in the rear, although a 9” wheel might be a good compromise for decent trail and hardback. Should be able to air down a bit more than a 10” wheel.