• AC Rear harness for 2005 HH 150

  • Have a technical problem? Ask here.
November 2019 Forum Retirement
Due to lack of extra personal time (and too much spam), I'm retiring the forum and setting it to a read-only state. No new registrations or posts will be accepted as of 11/09/19. However, all information will stay up and searchable. If you spend a few minutes searching, you'll find the answers you're looking for. We may re-open the forum next spring.
Have a technical problem? Ask here.
Forum rules: Help us to help you, by reading our information in this Forum thoroughly and performing the tests within to pinpoint your issue.
 #10874  by plee911
 Thu Aug 31, 2017 12:23 am
Ok so I need a new rear engine wire harness. For a 2005 HH twister 150 standard. Not sure if I have a dc or AC CDI but From what I have seen on the forums I will want to covert to an AC CDI and since I have to replace the entire back harness anyway it makes sense to do it now. My question is your parts list shows nothing for a replacement engine wire harness for the standard HH only the pig tails. Is there another harness that will work or do I have to get pig tails and build my own?
 #10885  by Travis @ Buggy Depot
 Fri Sep 01, 2017 12:12 pm
What I recommend in this situation is to convert to our Crossfire 150R harness along with a 6-to-9 chassis adapter. Here's what you'll need:

Wiring Harness, Engine, for Tomberlin Crossfire
https://www.buggydepot.com/product/366/ ... sfire.html

9-to-6 Chassis Harness Wiring Adapter
https://www.buggydepot.com/product/657/ ... apter.html

Important!
Depending on your specific pinout, you may have to swap pins on the adapter. When you get ready to do the install, I'll create a pinout and basic guide. This may not be a simple plug-and-play deal, but at the end you'll be able to get replacement harnesses easily.

Image

Image

Image