• no spark

  • Have a technical problem? Ask here.

    READ THE SECTION RULES BEFORE POSTING FOR HELP
Have a technical problem? Ask here.

READ THE SECTION RULES BEFORE POSTING FOR HELP
Forum rules: Help us to help you, by reading our information in this Forum thoroughly and performing the tests within to pinpoint your issue.
 #13361  by jdm
 Tue Apr 02, 2019 1:02 pm
hello, this is jared here. I have a helix FOX 150cc and i do not have any spark.i replaced the coil,start solenoid,and the wiring harness.On the new harness there is a bk/rd wire coming from the stator that has 75vac.But there is no where for this wire to plug into the cdi or anything.the blue and yellow wire from the crank sensor is putting out 0.05vac. Help!!!!!