Guides: GY6 Engine Internals Archives - Buggy Depot Technical Center

Travis @ Buggy Depot August 16, 2018

Many older 150cc models have zero wiring support. Even manufacturers that are still in business sometimes refuse to produce wiring...

Travis @ Buggy Depot October 24, 2016

Installing the BDX HEAVY DUTY GY6 mount for Ruckus NPS50 takes about 20 minutes with standard garage tools. For additional...

Travis @ Buggy Depot March 14, 2015

Welcome to the very first article in our new How It’s Made! series. These articles will serve as “build threads”...

Travis @ Buggy Depot September 4, 2014

Ignition systems that use a “DC” powered ignition box are pretty rare. Even so, we get a lot of questions...

Travis @ Buggy Depot June 22, 2014

If your carburetor is feeling a little congested, we have the remedy. Carburetor cleaning procedure Before taking anything apart, be...

Travis @ Buggy Depot October 24, 2016

Fuel and vacuum line connection diagram for the Mikuni Fuel Pump used on Honda Ruckus GY6 swaps...

Travis @ Buggy Depot July 30, 2015

Here are two methods to bleed your brakes without pulling your hair out in the process. The fact that you’ve...

Travis @ Buggy Depot February 12, 2015

Installing an upgraded stator is a great way to get additional power for stronger lights or to boost your charging...

Travis @ Buggy Depot August 16, 2014

Use our interactive CVT diagram to learn how your CVT Transmission works. Raise and lower the RPM of your virtual...

Travis @ Buggy Depot June 21, 2014

Yerf-Dog made several design changes to the front-end of the 150cc Go-Kart series. Not all generations of Spindle and A-Arms...