Do you offer a front end retrofit package? A rebuild kit that contains all the parts to convert a Manco Warrior to a spiderbox?
spindles
A-arms
tie rods
rack and pinion
U-jointed steering shaft
front end frame Mount and A-arm bolts and so on........
Or is it a "one part at a time" deal?????
Buggy Depot - Off Road Buggies 3.0
The hot spot for 150cc Buggies, Scooters, & ATV's
Conversion parts
2 posts • Page 1 of 1
Conversion parts
by Greyfox on Tue Apr 20, 2010 2:46 pm
^!^ Greyfox
White Dragon Ranch
Bellville, Tx 77418
Tomberlin Crossfire 150R
Purchased used 2/2010
Howhit 150cc Bored to 155cc
TSC 3/8" fuel line
Bypassed choke
Home made extended cooling duct and screen for CVT
50 watt chrome "Platinum Burners" Night driving lights and switch in addition to the stock trail lights
BDX Upgrades:
Uni High flow air cleaner
High output ignition coil
(Red) CDI
(Yellow) 1500RPM contra spring
Koso 115mm variator/12g rollers
(Red) High stall clutch
Drive belt
Throttle cable
Intake
3 point safety harnesses
Manco Warrior 720L-08
Subaru Robin 10hp 265cc
BD hubbs and 8x8 rims
Manco Havac M5
Subaru Robin 5hp 126cc
White Dragon Ranch
Bellville, Tx 77418
Tomberlin Crossfire 150R
Purchased used 2/2010
Howhit 150cc Bored to 155cc
TSC 3/8" fuel line
Bypassed choke
Home made extended cooling duct and screen for CVT
50 watt chrome "Platinum Burners" Night driving lights and switch in addition to the stock trail lights
BDX Upgrades:
Uni High flow air cleaner
High output ignition coil
(Red) CDI
(Yellow) 1500RPM contra spring
Koso 115mm variator/12g rollers
(Red) High stall clutch
Drive belt
Throttle cable
Intake
3 point safety harnesses
Manco Warrior 720L-08
Subaru Robin 10hp 265cc
BD hubbs and 8x8 rims
Manco Havac M5
Subaru Robin 5hp 126cc
-
Greyfox - Buggier
- Posts: 66
- Joined: Tue Feb 16, 2010 5:41 pm
- Location: Middle of Nowhere, Texas
Re: Conversion parts
by Travis @ BD-ORB on Thu May 27, 2010 2:29 pm
Hey GreyFox,
We have nearly all of the parts that make up the front-end package in-stock. I can compile a list of everything, are you still interested in the conversion?
We have nearly all of the parts that make up the front-end package in-stock. I can compile a list of everything, are you still interested in the conversion?
Greyfox wrote:Do you offer a front end retrofit package? A rebuild kit that contains all the parts to convert a Manco Warrior to a spiderbox?
spindles
A-arms
tie rods
rack and pinion
U-jointed steering shaft
front end frame Mount and A-arm bolts and so on........
Or is it a "one part at a time" deal?????
Travis @ http://www.BuggyDepot.com/
"Specializing in high strength reinforcements & GY6 performance solutions!"
--
Yerf Dog 3202 GY6 ~ Super lightweight 295lbs [47mph Record]
Blade 150SX Midnight Black ~ 182.5cc [53mph Record]
- 62mm Big Bore Cylinder
- 60mm Stroker Crank
- 0.050" Decked Head
- BDX S1/S2 Engine/Trans Packages [10g/1500RPM]
Yerf Dog 3206 (Red)
Yerf Dog 42092 (Lime Green)
Twister Hammerhead 150 [Stock]
Tomberlin Crossfire 150R [Stock]
"Specializing in high strength reinforcements & GY6 performance solutions!"
--
Yerf Dog 3202 GY6 ~ Super lightweight 295lbs [47mph Record]
Blade 150SX Midnight Black ~ 182.5cc [53mph Record]
- 62mm Big Bore Cylinder
- 60mm Stroker Crank
- 0.050" Decked Head
- BDX S1/S2 Engine/Trans Packages [10g/1500RPM]
Yerf Dog 3206 (Red)
Yerf Dog 42092 (Lime Green)
Twister Hammerhead 150 [Stock]
Tomberlin Crossfire 150R [Stock]
-
Travis @ BD-ORB - Site Admin
- Posts: 580
- Joined: Fri Jul 29, 2005 2:57 am
2 posts • Page 1 of 1
Return to Questions and comments about the BD Online Store
Who is online
Users browsing this forum: No registered users and 1 guest