Identifying Yerf GX150 Spindle Generations
[7,279 views - 3 comments - Rating 5/5 ]

The Yerf-Dog GX150 buggies were subject to several front suspension design changes while the buggies were in production. Not all generations of spindle and A-Arms work together. See below for info on how to distinguish which generation you have.

First Generation & Second Generation
The first and second generation Yerf-Dog GX150 spindles are identified by un-equal length A-Arms. The upper A-Arms are shorter than the lower arms. If your upper A-Arms are shorter than the lowers, our BDX 1st & 2nd Generation Heavy Duty spindle will fit.

Third Generation
3rd generation spindles are identified by equal length A-Arms. If all four of your A-Arms are the same length, our BDX 3rd Generation Heavy Duty Spindle will fit.

	Poster #1 [07/07/10]
	Does anyone know where to find the spindle spacers to put on the shaft in between the tires bearing and the inside spindle shaft?

	Poster #2 [12/05/10]
	I need a country mile to turn my yerfdog 150 around any ideas.

	Poster #3 [02/14/12]
	If you have un-equal arms. Can you make them equal by buying a even upper a arm or do you have to buy a whole set ?

Write a comment:	Rate this article (no comment needed) 5/5 - Extremely Helpful... 4/5 - Helped me, but not entirely clear... 3/5 - Needs more detail... 2/5 - Should be revised... 1/5 - Re-do this one...
Please note: Our staff does not typically provide support in the comments section. For tech support or help with an order, please contact us or visit our online forum. Are you a human? Type "yes": You can rate this article without commenting... Just select your rating and leave the comments form blank!