BuggyDepot News |
| |
|
|
|
Please note... |
| |
| Content
is copyright © 2005 - 2010 Buggydepot.com |
|
|
|
CDI REWIRE FOR ROVER, SCOUT, AND CUV MODELS [6,025 views] |
| |
|
A detailed diagram and instructions that show how to rewire the CUV harness to accept a common GY6 CDI, eliminating the larger unit that comes stock.
The Yerf Dog Rover and Scout models come with a CDI from the factory that is not interchangeable with the standard style of CDI. This puts CUV owners in a tough spot when it comes time to replace a failing CDI.
To perform this rewire, you will need: 8-Pole stator w/ 5 wires, a Standard CDI, and a GY6 flywheel puller.
A Performance CDI will also work in place of the standard CDI. Also, if you are good at electrical work and want the full potential of your electrical system, the 11-pole stator and HD regulator can also be used. To use the 11-pole stator this rewire mod will have to be combined with the 11-pole rewire.
This diagram and article is provided for informational purposes. Perform this modification at your own risk, we will not be held responsible for any damages that occur from performing this modification. We will not take returns on stators or CDI's used in this rewire.
|
| This article has been downloaded 6,025 times |
0 comments about this article:
|
|
|